塑料管材彎曲試驗機

用途                                                                              
塑料管材彎曲試驗機適用于絕緣電工套管等材料的彎曲試驗，彎曲的總角度為180，試驗后觀察試樣有無裂痕。符合：GB/T14823.2《電工安裝用導管特殊要求剛性絕緣材料平導管》、JG/3050-1998《建筑用絕緣電工套管及配件》及ZBG33008《聚氯乙烯塑料波紋電線管》等要求. 本試驗機能在一臺設備上測試標準規(guī)定的三種導管，不需要更換成形模及彎曲型錕。且操作方便、直觀可靠，因此，應用愈來愈廣。
塑料管材彎曲試驗機技術(shù)參數(shù)： GWE
1、 試樣導管直徑：16mm 20mm 25mm
2、成形模槽底半徑：48mm 60mm 75mm
3、彎曲型錕中心軌跡半徑：84mm 10mm 131.25mm
4、成形模及彎曲型錕槽半徑：8.1mm 10.1mm 12.6mm
5、彎曲型錕槽底直徑：24mm 30mm 37.5mm
6、試樣彎曲總角度：180
7、外形尺寸350×320×850
8、重量： 30Kg

Plastic pipe bending machine
use
Such as plastic pipe bending machine is suitable for electrical insulation casing material bending test, bending Angle of total was $180, after test observation samples with and without cracks.: GB/T14823.2 the electricians install flat tube with catheter special request rigid insulation materials ", JG / 3050-3050 "building electrical insulation casing and accessories" and ZBG33008 PVC plastic corrugated wire and tube and other requirements. This trial function on one device test standard stipulated by the three types of catheter, do not need to change the forming mold and curved kun.And easy to operate, intuitive and reliable, therefore, more and more widely used.
Plastic tubing bending machine technical parameters:
1, sample tube diameter 16 mm: 20 mm to 25 mm
2, forming die radius of the bottom of the channel: 48 mm 60 mm to 75 mm
3, kun center track curved radius: 10 mm to 131.25 mm 84 mm
4, forming die and curved kun chamfer radius: 8.1 mm to 10.1 mm to 12.6 mm
5, kun curved groove bottom diameter: 24 mm to 30 mm to 37.5 mm
6, specimen bending Angle: 180
7, appearance size 350 * 320 * 320
8, weight: 30 kg